This robot chassis can be used to construct various robots such as Line Follower, Grid Solving Robot, Wireless Controlled Robot, PC Controlled Robot, X-Bee Controlled Robot, Bluetooth Controlled Robot, DTMF Robot and many more.
This kit contains RF transmitter & receiver that receives serial data and transmits to the receiver through an antenna which is connected to the 4th pin of the transmitter. When logic 0 applied to transmitter then there is no power supply in transmitter.When logic 1 is applied to transmitter then transmitter is ON and there is a high power supply in the range of 4.5mA with 3V voltage supply,2 x BO Motors-Single Shaft Plastic Gear Motor that includes BO series L Shape Motor that gives good torque and RPM at lower operating voltages, which is the biggest advantage of these motors. Small shaft with matching wheels give optimized design for your application or robot.It is light in weight which makes it suitable for in-circuit placement,2 x BO Motor Wheels of 7.2 cm which is suitable for motion of the robot,2 x Metal castor wheels that help to rotate or in changing direction when instruction is given or sense obstacles,6 x F to F jumper wires are good to wire harness or jumpering between headers on PCB’s. These premium jumper wires are 8″ (20cm) long. They have 0.1″ female header contacts on either end and fit cleanly next to each other on standard-pitch 0.1″ (2.54mm) header,Nut bolts that is Used to set all the component on the Chassis.