per page
  • Pir Motion Sensor Detector

    Wide operating voltage range: default voltage DC 3.6V ~ 20V temperature compensation high output signal

    INR 250.00 INR 171.88
  • DTMF module

    Compatible with arduino, raspberry pi, arm, avr, pic, 8051, etc - can provide bidirectional drive currents of up to 600-ma at voltages from 4 With terminal blocks for connecting motors and power supply and berg sticks for control signals from microcontroller Can control 2 dc motors, their direction using control lines and their speed using pwm

    INR 99.00
  • joystick module

    This Joystick Module can measure position coordinates on the X and Y axis by moving the "hat". It also contains a switch that is press-able by pushing the "hat".It also contains a switch that is press-able by pushing the "hat" down. Similar to what is used in the XBOX controller.

    INR 170.00
  • Barcode Reader module

    Light Source: Visible Red light 632nm LED/Sensor: Linear CCD Sensor/Reading Indicator: Beeper Output Voltage: -9V~+9V/Stand-by Current: 50mA/Working Current: 150mAInterface: RS232 Working Frequency: 8MHz/Working Temperature: 0°C ~ 50°C (32 oF to 122 oF)/Storage Temperature: -20°C to 70°C (-4 oF to 158 oF)

    INR 2,999.00
  • Gy 85 BMP085 sensor module

    Chip: L3G4200D Power Supply: 3-5V Communication Mode: IIC / SPI communications protocol Measuring Range: 250/500/2000 dps Communication Interface: I2C (up to 400 kHz) or SPI (10 MHz; 4 & 3 wire) Operating temperature: -40 to +185 °F (-40 to +85 °C) Size: 23mm x 23mm Color: Blue

    INR 750.00
  • light sensor

    Digital switching outputs (0 and 1) Using LM393 comparator chip, stable Small board PCB size: 3cm * 1.6cm With fixed bolt hole for easy installation

    INR 203.39
  • Rain Drop Sensor Module

    Operating voltage: DC3.3-5.5V Operating current: less than 20mA The output format : digital switching outputs ( 0 and 1 ) analog voltage output AO Easy to complete water to analog signal conversion and output analog values can be directly read Arduino development board

    INR 225.00
  • ultrasonic sensor

    Working voltage: 5v(dc) Static current: less than 2ma Output signal: electric frequency signal, high level 5v, low level 0v Sensor angle: not more than 15 degrees Detection distance: 2cm-450cm

    INR 150.00
  • infrared sensor

    Power: 3-5V DC power supply. When the power is turned on, the red power indicator lights; Screw holes: 3mm, easy fixed installation; Board size: 3.2CM * 1.4CM Comparators: LM393, stable;

    INR 120.00
Showing 1 - 9 of 44 items